Anaesthesia Workstation

KEY FEATURES:

4 tube Adult & Paediatric system Hypoxic Guard-Oxygen, Nitrous

5’’ Display System Ventilator with Dual Mode –Adult & Paediatric

Monitor with 5 multipara facilities

Imported ISO Fluorine/ Savo Fluorine/ Halothane Vaporizer

Manometer Circle Absorber System

Extra Space with dual drawers’ soundless ball channel systems.

Back side operated for gas input system with Yokes & SSV. 

SYSTEMA-18 Anaesthesia Workstation

KEY FEATURES:

4 tube Adult & Paediatric system Hypoxic Guard-Oxygen, Nitrous

5’’ Display System Ventilator with Dual Mode –Adult & Paediatric

Monitor with 5 multipara facilities

Imported ISO Fluorine/ Savo Fluorine/ Halothane Vaporizer

Manometer Circle Absorber System

Extra Space with dual drawers’ soundless ball channel systems.

Back side operated for gas input system with Yokes & SSV

VENTILATOR:

Display : 5” LCD

Mode of Operation : IPPV, SIMV, PLV, BAG and Standby

Tidal Volume : 50 to 1500 ml

Respiratory Rate : 6 to 40 BPM

SIMV Rate : 1 to 39 BPM

I: E Ratio : 4:1 to 1:4

Plateau : 0 to 50%

Trigger : 1 to 9 cmH2O

Pressure Limit : 0 to 60 mBar

Alarms : Pressure Low and High, RR Low and High,

FIO2 Low and High, Active patient, Driving

Gas failure, low battery indication, Circuit

Disconnect, Minute Volume Low and High

Monitoring Factors : Tidal Volume, Minute Volume, RR, FIO2, PEEP

Obtained

Power Input : 90 to 260 V AC 50/60 Hz

Driving Gas Input : 3 Bar Pressure

Sensor Type : Envitec SpiroQuant H

Patient Type : Adult and Pediatric

Battery Backup : 2 hours (Lithium-ion)

Multipara Monitor :

6 Standard Parameters: ECG, RESP, NIBP, SPO2, 2-Temp, PR/HR.

8” high resolution colour TFT LCP display with touch screen.

Real time S-T segment analysis, pace maker detection.

Multi lead ECG wave forms display in phase

Up to 2 hours working capacity of built in rechargeable battery

Networking capacity

Patients info input management function

Capture dynamic waveforms.

Efficient resistance to interference of defibrillator and HF knife.

Large volume of tabular and graphic trends information storage and easy to recall.

Key Features:

3 gas system Hypoxic Guard-Oxygen, Air, Nitrous

Ventilator with Dual Mode –Adult & Paediatric

Monitor with 5 multipara facilities

Imported ISO Fluorine/ Savo Fluorine/ Halothane Vaporizer

Circle Absorber System

Extra Space with dual drawers’ with soundless ball channel systems.

Multipara Monitor:

6 Standard Parameters: ECG, RESP, NIBP, SPO2, 2-Temp, PR/HR.

8” high resolution colour TFT LCP display with touch screen.

Real time S-T segment analysis, pace maker detection.

Multi lead ECG wave forms display in phase

Up to 2 hours working capacity of built in rechargeable battery

Networking capacity

Patients info input management function

Capture dynamic waveforms.

Efficient resistance to interference of defibrillator and HF knife.

Large volume of tabular and graphic trends information storage and easy to recall.

Ventilator :

Patient Type Adult and Pediatric

Tidal Volume 50 to 1200 ml.

Frequency 8 to 40 BPM

I : E Ratio 1:1, 1:2, 1:3 and 1:4

Mode of Operation CMV, Manual

Alarms Pressure Low and High, Active patient, driving gas failure , low battery indication, circuit disconnect, Minute Volume low and High

Monitoring Parameters -Tidal Volume and Minute Volume

Pressure Display -10 to 90 mBar in LED graph

High Pressure Limit 20 to 60 mBar

Low Pressure Limit 0 to 20 mBar

Power Input 90 to 260 VAC 50/60 Hz

Minute Volume High 3 to 50 Liters

Minute Volume Low 0 to 47 Liters

Driving Gas Input 3 Bar Pressure

Battery Backup up to 2 Hours ( Lithium-ion )

Vaporizer:

Tec 7 or latest model will be added with this model.

          Display                        :            7” TFT with Touch Screen

                               Mode of Operation  :            IPPV, SIMV, PLV, BAG and Standby 

Tidal Volume             :            50 to 1500 ml

Respiratory Rate      :           6 to 40 BPM 

SIMV Rate                  :           1 to 39 BPM 

I: E Ratio                     :            4:1 to 1:4  

Plateau                      :           0 to 50% 

Trigger                        :           1 to 9 cmH2O 

Pressure Limit             :           20 to 60 mBar 

Alarms                        :           Pressure Low and High, RR Low and High, 

                                                 FIO2 Low and High, Active patient, Driving

                                                 Gas failure, low battery indication, Minute 

                                                Volume Low and High 

Monitoring Factors   :           Tidal Volume, Minute Volume, RR, FIO2, PEEP

                                                 Obtained  

Power Input               :       90 to 260 V AC 50/60Hz 

Ce Certified Anaesthesia Machine

This Anaesthesia Machine is offered to the esteemed customers at highly competitive prices. These machines are ideally used in medical sector such as hospitals and others, thus, are highly demanded in the market. Our range of machines is manufactured by employing the most modern technology and machinery. The Anaesthesia Machine offered by us is widely acknowledged by the clients for its efficient functioning, rugged construction, easy usage and durable standards.

A.the Aparatus :

Tubular Rigid Steel Section Duly Powder Coated With Rear System Wheel. Sufficient Space Provided At The Top Level Of Lower Drawer Along With Guarded Table Top Steel Tray. Top Tray Provided At Eye Level For Keeping Monitoring Equipments. Four Antistatic Castor Wheels With Brake Have Been Fitted For Easy Mobility.

B. Attachment :

Hypoxia Guard: 3 Tube (mnlcp's Glass Tube) Hypoxia Guard With Rotameter Has Attached (oxygen, Air Rotameter).230 Mm Long Accurately Calibrated Rotating Bobbing Flowmeters.Oxygen : 100 Ml / Min To 8 Lpm : 200ml / Min To 12 Lpm

Yoke: 2 Oxygen Compact Yoke & 2 Nitrous Compact Yoke & One Air Compact Yoke Has Inserted.

Non-return-cum-pressure Relief Valve: Blow Off Excess Pressure In The Circuit. Release Pressure 100 Cm H2o+10% , H2o-10%.

Change Over Unit: Emergency Oxygen Flush Button Is Provided At Table Top Level On The Front . Flow Range 35 Lpm Calibrated To 60 Psi (+5,-5)

Regulator: 2 No's 

 Regulator (cut Off Facility) & 2 No's Oxygen Preset Regulator, Been Provided With 2 No's  & 2 No's Oxygen Pressure Gauge(2.5) Fixed On Bend Gauge Post.

Alarm: Oxy Failure Alarm, If Flow Of Oxygen (02) Goes Flow Below 2.5 Lpm (audio-visual).

Emergency Unit Also Attached With It. Double Manifold Also Attached With It. Dual Drawer System Is Already There.

C. Patient Circuit :

 1.bag Mount, 2.rebreathing Bag (2 Ltrs), 3.corrugated Tube (anti Static), 4.expiratory Valve, 5.angle Mount, 6.catheter Mount, 7.face Mask (adult & Child) With Tube, 8.adopted Plug In Hose.

D. Optional :

Circle Absorber System : Twin Canister Circle Absorber System Is Provided With Swiveling Facility. Canisters & Inspiratory Valve Have Quick - Fit Tapper Fitting With Rubber Ring For Leak Proof Seal & Easy Maneuver Ability. Bag Mount & Apl Valve Assembly Have Swivel Arms For Easy Accessibility. Ventilator, Monitor Also Attached With It, Provision For Vaporizer Is There.

Warranty: Mfg Warranty For Machine Is 1 Year.

Special Features:

3 Gas systems Hypoxia guard Rota meter-pneumatic device ensures no NO flow, if oxygen flow is lower than 0.5ltr/min. approx. Minimum 25% (+5%) Oxygen (1:3 mixed ratio between O2 & N2O) in Surgery gas mixture.

Oxygen locked N2O supply Oxygen failure warning device.

Higher efficiency forged regulators & yokes with M.S. fittings.

Panel mounted high & low pressure display gauges and audio visual Oxygen failure warning device.

High precision pressure relief cum non return valve.

Halothane Change over mechanism with oxygen flush (open & close circuit).

Oxygen & NO gas inlet point each 3 nos. & 1 no. Airgas Point at the back.

Standard Magill''s circuit, all rubber antistatic tested.

Trolley made of power coated M.S. table - Top tray, modified monitoring accessories.

Drawer top M.S. steel tray 5 dia antistatic breaking castor wheel.

Oxygen outlet for driving ventilator (Double)

Large diameter (63mm) O2 & N2O gauge each two for high visibility & clarity O2 & N2O operating pressure (4.22kgf/cm2) display gauge each one.

Central pipe line connection & 10 liters W/C cylinder carrier facility.

Structure: MS structure.

Provision for : Tec vaporizer, Circle absorber (Optional at extra cost).

Extra Attachment:

Circle Absorber

Tec Vaporizer

Monitor

Ventilator

Vaporizer

The Anaesthesia Machine is offered to the esteemed customers at highly competitive prices. These machines are ideally used in medical sector such as hospitals and others, thus, are highly demanded in the market. Our range of machines is manufactured by employing the most modern technology and machinery. The Anaesthesia Machine offered by us is widely acknowledged by the clients for its efficient functioning, rugged construction, easy usage and durable standards.

Other details:

Rotameters: 230 mm long accurately Calibrated Rotating Bobbing Flowmeters.Oxygen : 100 ml / min to 8 LPM

Ether: Eather vaporizer with Bottle (50 cc to 300 cc) supplied as standard accessories. Goldman vaporizer may be provided as per customer's choice.

Non-Return-cum-Pressure Relief valve: Blow off excess pressure in the circuit. Release pressure 100 CM H2O+10% , H2O-10%.

Change over Unit: Emergency oxygen Flush Button is provided at table Top Level on the front . flow range 35 LPM calibrated to 60 PSI (+5,-5)

Regulator: 2 No's NO Regulator (cut off facility) & 2 No's Oxygen Preset Regulator, been provided with 2 No's NO & 2 No's Oxygen pressure gauge(2.5) fixed on bend gauge post.

Alarm: Oxy failure alarm, if flow of oxygen (02) goes flow below 2.5 LPM

MNLCP MRI Anaesthesia Machine:

• We (MNLCP) do manufacture MRI Compatible Anaesthesia Machine.
• Our MRI Machine has the facilities for 2 gases (O2 & N2O) or, three gases (O2, N2O, Air) system inbuilt. This machine has some kind of mechanism with its materials and technique which enable it a fully MRI Compatible machine for higher end use. It looks like an ordinary machine but it has the facility to work under MRI room.

Special Features:

SS / MS Structure available

2 Gas systems Hypoxia guard Rota meter-pneumatic device ensures no NO flow, if oxygen flow is lower than 0.5ltr/min. approx. Minimum 25% (+5%) Oxygen (1:3 mixed ratio between O2 & N2O) in Surgery gas mixture.

Oxygen locked N2O supply Oxygen failure warning device.

Higher efficiency forged regulators & yokes with M.S. fittings.

Panel mounted high & low pressure display gauges and audio visual Oxygen failure warning device.

High precision pressure relief cum non return valve.

Halothane Change over mechanism with oxygen flush (open & close circuit).

Oxygen & NO gas inlet point each 3 nos. & 1 no. Airgas Point at the back.

Standard Magill's circuit, all rubber antistatic tested.

Trolley made of power coated M.S. table - Top tray, modified monitoring accessories.

Drawer top M.S. steel tray 5 dia antistatic breaking castor wheel.

Oxygen outlet for driving ventilator (Double)

Large diameter (63mm) O2 & N2O gauge each two for high visibility & clarity O2 & N2O operating pressure (4.22kgf/cm2) display gauge each one.

Central pipe line connection & 10 liters W/C cylinder carrier facility.

Structure: MS structure.

Provision for: Tec vaporizer, Circle absorber (Optional at extra cost).

Extra Attachment:

Circle Absorber

Tec Vaporizer

Monitor

Ventilator

Vaporizer

Circle Absorber (Sodalime) Unit for Anaesthesia Machine

Owing to our decades of experience in the domain has enabled us in offering an international quality standard ofCircle Absorber. Manufactured with utmost precision, these absorbers are widely appreciated among our clients for attributes like leak proof quality, easy cleaning and efficient performance. Ourcircle absorber system, circle absorber anesthesiaenables significant reductions of the consumption of oxygen and safely anesthetics in open systems. Furthermore, we also offer these absorbers at a nominal price.

Specification

Transparent Light weight canister.

Double Chamber Adult size.

Soda lime Capacity 1800gms.

fullyautoclavable.

Reversible Soda lime canister fitted to control head by means of a central tube which is screwed into the head with a large plastic hand wheel.